Distance between centres 1250mm. Swing over bed 400mm. Swing over cross slide 245mm. Swing in gap 585mm. Spindle speeds (3 range) 15 – 2500 rpm. Main motor 7.5 kW (10 HP). Spindle nose D.1-6 Camlock. Bore through spindle 55mm. Spindle diameter 73mm. Spindle travel 140mm. Taper of centre No. 5 Morse. Machine 3 jaw chuck. 4 way PARAT quick change toolpost with holders. Interlocked guards, Low volt lighting, Coolant.
